[+] CLICK HERE FOR MORE IMAGES...
Madstad Adjustable Screen for Triumph Tiger 900 GT/Pro/Low & Rally/Pro 2020-2023 Ref: MDSTDTGR900 The Versatile Madstad Complete Solution - Adjustable RoboBracket with Screen
Compatible with GT / GT LOW/ GT PRO / RALLY / RALLY PRO models
Gives you total control over your windshield height, angle and airflow for the most comfort.
Madstad accomplishes superior airflow by separating your bike's windshield from its fairing with the patented adjustable RoboBracket system. By scooping air up under the windshield, it eliminates the vacuum normally generated behind your screen which causes turbulence and buffeting.
Your new windshield will then be fully adjustable for height, tilt and depth (distance from the rider). With the windshield raised from the fairing, air can flow underneath, eliminating the turbulence-causing vacuum behind it and giving you total control over the airflow and position of your shield, meaning one size shield will work perfectly for many different height riders.
Transform your ride with MadStad RoboBrackets, an adjustable wind management system that allows you to control the position and angle of your motorcycle windshield. The result is much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield could ever provide. The included side deflectors go wide to block lower air to keep turbulence off your body for a calm cockpit.
Why adapt to your windshield when your windshield can adapt to you?
This is a complete custom made system consisting of:
- A black aluminium base plate and mounting hardware
- Madstad adjustable brackets
- A choice of windshield sizes in Clear or Medium Grey tint
- A Pair of Side Deflectors
The Madstad base brackets bolt to the side of your forks and the adjustable windshield brackets then snap securely in and out of the spring -loaded locking tabs for easy installation and removal.
Shield size guide for riders...
Under 5'8" (173cm) - 18-inch (460mm) screen
5'8" - 5'10" (173-178cm) - 20-inch (510mm) screen
5'11" - 6'1" (180-185cm) - 22-inch (550mm) screen
Over 6'2" (188cm) - 24-inch (610mm) screen
How to measure more accurately
Sit on the bike and run a tape measure straight up from the ignition switch. Look straight ahead and estimate where your chin or mouth level is, then add 2 inches to estimate the windshield size. For example, if your chin/mouth level is at about the 20 inch mark on the tape then you should order our 22 inch windshield, because that is where the top edge of that shield will be when in its lowest position. The top edge of the 20 inch shield will be at 18 inches up from the ignition switch and so on. The brackets allow another 2 inches of upward height adjustment so if you are in-between measurements on an odd number, you can still raise the shield up, but you want to be able to see over the top edge of the windshield when it is in its lowest position.
Please Note: These are factory produced to order with approx. 2-3 weeks delivery (non-refundable payment taken at time of order).
Please select your screen size and tint
|
| |
(Shipping costs calculated before checkout and 20% UK VAT/tax will be removed for non-UK destinations)
|
