[+] CLICK HERE FOR A LARGER IMAGE...
Nitron NTR R1 Sport - Big-Piston Integral Pressurised Gas-Monotube Rear Shock Absorber for Moto Guzzi Motorcycles Ref: NTSPTMGZ
Simply fit and feel the ride
The perfect, compliant and controlled road shock - built just for you, to your exact specification, from your suspension specialists, HPS
Despite being Nitron's entry level bespoke rear shock absorber, with its full 40mm diameter piston, this unit will outperform much more expensive units from the "bigger" manufacturers and will always offer a significant improvement in comfort and response over the OE shock fitted to your bike - even if it has a remote or piggy-back reservoir. It features a totally uncomplicated single adjuster knob which tunes both rebound and compression damping simultaneously - making it perfect for the road biased rider and, don't forget, we have a special build service for shorter riders who need a lower seat height; please ask for details.
Made in England, all Nitron shocks supplied by HPS are totally rebuildable and backed with a full UK technical support and service operation.
| Best products of the year feature
"Nitron Sport shock... Affordable, high quality suspension unit for road riders."
Rupert Paul, Journalist, BIKE magazine
|
| After fitting the Nitron shock our customer said...
"I was slightly surprised when I sat on the bike that the suspension moved and that when I rode it my pelvis did not flex. It also became apparent that I don't have double vision at speeds over 60mph after all... and the seat is not in fact made of forged steel. My kidneys appear to be in the same place they were at the start of the ride which is a bonus.
The downside is that the plushness of the rear end now highlights just how bad the forks are... The upside is that I don't have to buy a new seat!
I should have done this years ago. Thanks for your help." MG, Swindon
Honda Fireblade |
When ordering from HPS, please include your weight (with any specific requirements you may have regarding whether you want a lower or higher default seat height - i.e. if you are taller or shorter than average) and state how your bike is used (i.e. road solo only, road with pillion, road and track or track only etc.) as we will be building your shock to your specific order with the optimum length, spring rate and damper adjustments pre-set for you.
Please don't hesitate to call us at HPS to ask your suspension questions - we will be very happy to discuss your needs and assist.
- HPS will build your shock to order with the specification based on your individual needs and with all adjustments pre-set (see above)
- Large 40mm piston for more precise and consistent damping control (23.5% more damping oil flow than Öhlins TTX 36mm piston)
- Very straightforward single adjuster for rapid combined damping adjustment
- Manufactured from a hard-anodised corrosion-resistant CNC machined aluminium alloy body, combined with the same high quality internal components as in Nitron's range-topping shocks
- Pressurised Gas-Monotube design
- Manual preload adjustment with C-Spanner included, or...
- Optional remote Hydraulic Preload Adjuster (HPA) for instant changes to rear ride-height (eliminates use of C-Spanner) to vary steering response between road and track (also ideal for shorter riders or for those bikes where the laden weight varies significantly; e.g. from solo to with pillion & luggage)
- *Adjustable/increasable length as standard (for most bikes please confirm re. your bike prior to ordering) to fine tune ride-height and steering)
- Shorter shocks available to order for many bikes (please call/contact to confirm) for smaller riders who may wish to lower seat - typical seat height reduction achievable is up to 30mm/1.25”
- Very light weight (e.g. Triumph 675, more than 0.5 Kg lighter, even with Hydraulic Preload Adjuster included for Race version)
- 3rd piston Shim-Stack for very low speed rebound damping control
- Teflon lined low-friction rose jointed eyes where applicable (bike-dependent end fittings may differ from those shown here)
- Ultra low-friction piston rod seal design
- Completely rebuildable/re-valvable with rapid UK maintenance and support service
- By far the highest quality and best value entry level bespoke shock you can buy
- Includes Full 5 Year Warranty from HPS
Please note that for certain applications, appearance (i.e., colour of some components), may vary from those shown.
Choose your bike...
|
| Choose your spring colour...
|
| Tick here to add a Hydraulic Preload Adjuster (HPA) for just £264.00 inc. VAT |
Price:£459.00 (£550.80 Including UK VAT at 20%)
(Shipping costs calculated before checkout and 20% UK VAT/tax will be removed for non-UK destinations)
|
[+] CLICK HERE FOR A LARGER IMAGE...
Nitron NTR R3 Race - Hose Mounted Remote-Reservoir Rear Shock Absorber for Moto Guzzi Norge 1200 2006-2014 (3-Way Adjustable) Ref: NTRACMGZ
Superb value TRACK-DAY and RACE shock - built just for you, to your spec. (we can also build this shock for you in ROAD spec.)
Nitron's race shocks are designed for the most serious and demanding of riders and as such incorporate separate high and low speed compression damping control valves for further fine-tuning of setup for race bikes or for very high performance road use.
Offering significant dynamic and adjustability range benefits over OE sports bike shocks, this is the perfect unit for anyone looking for the best value performance shock you can buy, making it ideal for mixed road and track use.
Made in England, all Nitron shocks are totally rebuildable and backed with a full UK technical support and service operation.
When ordering from HPS please include your weight (with any specific requirements you may have regarding whether you want a lower or higher default seat height - i.e. if you are taller or shorter than average) and state how your bike is used (i.e. road solo only, road with pillion, road and track or track only etc.) as we will be building your shock to your specific order with the optimum length, spring rate and damper adjustments pre-set for you.
Please don't hesitate to call us at HPS to ask your suspension questions - we will be very happy to discuss your needs and assist.
- HPS will build your shock to order with the specification based on your individual needs and with all adjustments pre-set (see above)
- Manufactured with a hard-anodised corrosion-resistant aluminium alloy CNC machined body using the highest quality internal components
- Remote Hose (H) mounted gas pressure reservoir (bike model application dependent) for fade-free consistent high-performance operation
- *Adjustable/increasable length as standard (for most bikes please confirm re. your bike prior to ordering) to fine tune ride-height and steering)
- Shorter shocks available to order for many bikes (please call/contact to confirm) for smaller riders who may wish to lower seat - typical seat height reduction achievable is up to 30mm/1.25”
- Very light weight (e.g. Triumph 675, more than 0.5 Kg lighter, even with Hydraulic Preload Adjuster included for Race version)
- Separate compression and rebound damping adjustment for more advanced bike setup
- By far the best value professional race level shock you can buy
- 3rd piston Shim-Stack for very low speed rebound damping control
- Teflon lined low-friction rose jointed eyes where applicable (bike-dependent end fittings may differ from those shown here
- Ultra low-friction piston rod seal design
- Completely rebuildable/re-valvable with rapid UK maintenance and support service
- The highest quality - combined with the best value - race shock you can buy
- Includes Full 5 Year Warranty from HPS
!
Please note that appearance (i.e., colour of some components), may vary from that shown.
Price:£645.00 (£774.00 Including UK VAT at 20%)
(Shipping costs calculated before checkout and 20% UK VAT/tax will be removed for non-UK destinations)
|
